SLEIPNER EX95 Single Thruster 24V, 70-95kg Thrust

SLEIPNER EX Single External Pod Thruster

The EX series can be installed in most types of boats between 6 and 15 meters independently of hull form, hull material, propulsion and depth. These pod thrusters are an excellent choice where a tunnel thruster cannot be fitted, or as an extremely compact stern thruster. As they are easy to fit they are especially good for retrofitting. The flexible mounting at the extreme bow of the boat hull allows a deeper position underwater which creates an optimal leverage compared to conventional thrusters.

Benefits

• Optimally streamlined design. Hydrodynamic shape, very short flow-channel and ideal placement reduce the water resistance to a fraction compared to conventional systems. There is no perceptible loss of speed.
• Easy installation. Requires drilling of only three small holes to assemble, which are sealed tightly with a special rubber sealant. No fiberglass work is necessary.
• Minimal Noise Emission. About 80 % noise reduction is obtained by the external placement of the engine. this also results the elimination of possible border cavitations.
• Long duration. The external placement of the unit gives a more efficient water cooling and allows much longer duration per cycle of the unit than with traditional bow and stern thrusters.
• Space Saving. The complete drive unit is very compact and placed externally, saving valuable boat space. Only the operating and control elements, as well as the power supply remain inside the boat.
• Optimal Efficiency. Optimal efficiency results from a shorter transverse channel and ideal leverage which is created by deeper and more distant positioning away from the pivot point. Typically giving up to 40 % higher efficiency than with conventional systems.
• Quality. Every component included in the EX series is carefully choosen to meet the highest quality standards. The EX series is produced at our ISO-certified factory in Norway.

EX 95 Single

• for DC system = 24V
• Thrust at 11.5/21V = 67 kg
• Power at 11.5/23V = 3,0 kW
• Tunnel diameter = 150 mm
• Length: 55 cm; Ø: 16,5 cm, Weight: 19,5 kg

Not included are: Mounting Adapter, Control Panel, Power Cable, Fuse, Fuse Holder.

Options: Battery, Main Switch.